Question:

What could cause a PC to perform poorly and require multiple restarts to function normally?

I have a PC with a ryzen 5 2600 processor, a gtx 1650 graphics card, and a kolink 600w 80+ power supply. For several months, I have been experiencing a problem where my PC becomes very slow and only achieves around 40 fps in games, even though it should be able to reach around 200 fps. When I check the GPU usage, it shows 97-100% when I have hardware accelerated GPU scheduling enabled, but the performance does not improve.

The only way I can fix this issue is by restarting my PC multiple times until it runs normally. I have to do this every time I turn on my PC, and it usually takes more than 10 restarts. I suspect that the power supply might not be sufficient, but changing the power cord did not help. What could be the reason for this problem and how can I solve it? Thank you for your assistance.

Answer:

If you are facing a situation where your PC is running very slowly and needs multiple restarts to work properly, you might be wondering what is causing this problem and how you can fix it. There are several possible reasons for this issue, such as hardware malfunction, software conflict, malware infection, overheating, or power supply failure. In this article, we will explore some of the common causes and solutions for this problem.

Hardware malfunction

One of the possible reasons for your PC’s poor performance is that some of your hardware components are faulty or incompatible. For example, your graphics card might be damaged or not compatible with your motherboard, causing low fps and high GPU usage. To check if this is the case, you can try the following steps:

• Update your graphics card driver to the latest version.
• Check if your graphics card is properly seated in the PCI slot and connected to the power supply.
• Test your graphics card with another PC or test another graphics card with your PC.
• If your graphics card is faulty or incompatible, replace it with a new one or contact the manufacturer for warranty service.

Software conflict

Another possible reason for your PC’s poor performance is that some of your software programs are conflicting with each other or with your system settings. For example, your hardware accelerated GPU scheduling might be interfering with your game settings, causing low fps and high GPU usage. To check if this is the case, you can try the following steps:

• Disable hardware accelerated GPU scheduling and see if the performance improves.
• Check if your game settings are optimized for your PC’s specifications and adjust them accordingly.
• Close any unnecessary background programs that might be consuming your CPU, RAM, or disk resources.
• Uninstall any unwanted or suspicious programs that might be causing problems.
• Scan your PC for viruses and malware and remove any threats.

Overheating

Another possible reason for your PC’s poor performance is that your PC is overheating due to insufficient cooling or dust accumulation. Overheating can cause your PC to throttle down its performance to prevent damage to the components. To check if this is the case, you can try the following steps:

• Monitor your PC’s temperature using a software tool such as HWMonitor or SpeedFan.
• Check if your fans are working properly and spinning at the right speed.
• Clean your PC’s case and fans from dust and debris using a soft brush or a compressed air can.
• Improve your PC’s airflow by rearranging the cables, adding more fans, or upgrading to a better cooling system.

Power supply failure

Another possible reason for your PC’s poor performance is that your power supply is failing or not providing enough power to your PC. A faulty or insufficient power supply can cause your PC to crash, freeze, or restart randomly. To check if this is the case, you can try the following steps:

• Check if your power supply is compatible with your PC’s components and meets the minimum wattage requirements.
• Check if your power supply is connected properly to your PC and to the wall outlet.
• Test your power supply with a multimeter or a power supply tester to measure the voltage and current output.
• If your power supply is failing or insufficient, replace it with a new one or contact the manufacturer for warranty service.

Conclusion

In

conclusion, there are several possible causes for your PC’s poor performance and multiple restarts, such as hardware malfunction, software conflict, overheating, or power supply failure. To solve this problem, you need to identify the root cause and apply the appropriate solution. If none of the above steps work, you might need to consult a professional technician or contact your PC’s manufacturer for further assistance. We hope this article was helpful and informative. Thank you for reading.