When 100% Isn’t Enough: The Curious Case of Huawei Tablet’s Boot Issues


“Why does my Huawei tablet display a 100% charge, then shut down immediately, leaving only a green light active, without booting up?”


When you encounter a situation where your Huawei tablet displays a 100% charge but then shuts down immediately, leaving only a green light active, it can be both confusing and frustrating. This behavior is indicative of a few potential issues, which we will explore along with their solutions.


Battery Calibration Issues:

The battery might be displaying incorrect charging levels due to calibration problems. Despite showing 100%, the battery may not be fully charged, leading to an immediate shutdown.


Software Glitches:

A software bug or glitch could cause the system to misread the battery level or malfunction during the boot process.


Hardware Malfunctions:

The problem could also be due to a hardware malfunction, such as a faulty battery, power button, or internal components related to power management.

Diagnostic Steps:


Reset the Battery:

  • Turn off the tablet.
  • Connect it to the charger and charge it for at least 30 minutes.
  • While the device is still plugged in, press and hold the power button for about 15 seconds to reset the battery.
  • 2.

Boot in Safe Mode:

  • Press and hold the power button to turn on the device.
  • As soon as the Huawei logo appears, release the power button and immediately press and hold the volume down button.
  • Continue holding the volume down button until the device finishes booting up.
  • If the tablet boots successfully in safe mode, a third-party app could be causing the issue.
  • 3.

Perform a Factory Reset:

  • Back up all important data.
  • Go to Settings > System > Reset and tap on “Factory data reset.”
  • Follow the on-screen instructions to reset the device to its original state.


  • If the issue is software-related, a system update or factory reset may resolve the problem.
  • For hardware issues, it may be necessary to replace the battery or other components. This should be done by a professional technician.
  • If the tablet is still under warranty, contact Huawei customer support for further assistance.

Preventive Measures:

  • Regularly update your tablet’s software to the latest version.
  • Avoid overcharging the battery by unplugging the device once it reaches 100%.
  • Use only the original charger provided by Huawei to prevent any power-related issues.
  • In

conclusion, the green light indicates that the tablet is receiving power, but the failure to boot suggests a deeper issue. By following the diagnostic steps and considering the solutions provided, you can identify the root cause and take appropriate action to get your Huawei tablet up and running again. Remember, if you’re unsure or the problem persists, seeking professional help is the best course of action.

Leave a Reply

Your email address will not be published. Required fields are marked *

Privacy Terms Contacts About Us