What to Do When Your Acer Aspire Vero Nat Geo 2022 Laptop’s Bezel Pops Out


How can I repair the damaged bezel of my Acer Aspire Vero Nat Geo 2022 laptop?

I have noticed that the right bezel of my laptop screen is detached from the frame and exposes some internal components, such as a metal hinge and a white wire. This makes it hard to open and close the laptop lid without further damaging the bezel. The LCD display seems to be unaffected by this issue. I would like to know if this is a common problem for this model and what are the best options to fix it. I have attached a photo of the bezel for reference.


The bezel is the plastic or metal frame that surrounds the LCD screen of a laptop. It serves both aesthetic and functional purposes, as it protects the screen from dust, scratches, and impacts, and also holds the webcam, microphone, and speakers in place. However, the bezel can also get damaged due to various reasons, such as wear and tear, accidental drops, or faulty hinges. In this article, we will discuss how to identify and fix a broken bezel on an Acer Aspire Vero Nat Geo 2022 laptop, a model that was launched in 2022 as part of a collaboration between Acer and National Geographic to promote sustainability and environmental awareness.

How to tell if your bezel is broken

The most obvious sign of a broken bezel is when it is visibly detached from the screen or the frame, exposing the internal components of the laptop. This can happen on one or both sides of the screen, depending on the severity of the damage. You may also notice that the bezel is cracked, chipped, or warped, or that the screen is loose or wobbly. Another indicator of a broken bezel is when you have difficulty opening or closing the laptop lid, or when you hear a clicking or creaking sound when you do so. These symptoms suggest that the hinge mechanism that connects the screen and the base of the laptop is compromised, and that the bezel is putting pressure on the hinge or the wire that runs through it.

What causes the bezel to break

There are several possible causes of a broken bezel, but the most common one is a faulty hinge. The hinge is the part that allows the screen to rotate and adjust its angle, and it is usually made of metal or plastic. Over time, the hinge can wear out, loosen, or break due to frequent use, improper handling, or manufacturing defects. When this happens, the hinge can no longer support the weight and tension of the screen, and it can cause the bezel to pop out or crack. Another cause of a broken bezel is physical impact, such as dropping the laptop, hitting the screen, or placing heavy objects on the lid. This can damage the bezel directly, or cause the hinge to bend or snap.

How to fix a broken bezel

The best way to fix a broken bezel is to replace it with a new one. This is a relatively simple and inexpensive process, and it can restore the appearance and functionality of your laptop. However, before you attempt to replace the bezel, you should first check if your laptop is still under warranty, and if so, contact the manufacturer or the seller for assistance. Replacing the bezel yourself may void the warranty, and you may risk damaging other parts of the laptop. If your laptop is not under warranty, or if you prefer to do it yourself, you will need the following tools and materials:

  • A new bezel that is compatible with your laptop model. You can order one online or from a local computer store.
  • A screwdriver that matches the size and type of the screws on your laptop. You may need a Phillips, Torx, or flathead screwdriver, depending on your laptop model.
  • A plastic pry tool or a guitar pick to gently pry open the bezel without scratching the screen or the frame.
  • A soft cloth or a microfiber cloth to clean the screen and the frame before attaching the new bezel.
  • To replace the bezel, follow these steps:

    1. Turn off the laptop and unplug the power cord and any other cables or devices connected to it. Remove the battery if possible.

    2. Open the laptop lid and lay it flat on a clean and flat surface. Use the cloth to wipe the screen and the frame to remove any dust or dirt.

    3. Locate the screws that hold the bezel in place. They are usually hidden under small rubber covers or stickers on the corners or the sides of the screen. Use the screwdriver to remove the covers or stickers and unscrew the screws. Keep them in a safe place for later use.

    4. Use the pry tool or the guitar pick to carefully lift the bezel from the screen. Start from one corner and work your way around the edges, applying gentle pressure and avoiding the webcam, microphone, and speakers. Once the bezel is loose, lift it off and set it aside.

    5. Check the hinge and the wire for any damage or loose connections. If the hinge is broken or bent, you may need to replace it as well. If the wire is cut or frayed, you may need to solder it or tape it with electrical tape. If everything looks fine, proceed to the next step.

    6. Align the new bezel with the screen and the frame, making sure that the holes and the slots match. Press the bezel firmly until it snaps into place. You may hear a clicking sound when the bezel is secured.

    7. Replace the screws and the covers or stickers that you removed earlier. Tighten the screws but do not over-tighten them, as this may damage the bezel or the screen.

    8. Test the laptop by turning it on and adjusting the screen angle. Make sure that the bezel is firmly attached and that the screen is stable and clear. If everything works well, you have successfully replaced the bezel. If not, you may need to check the hinge or the wire again, or contact a professional for help.

    How to prevent the bezel from breaking

    To prevent the bezel from breaking again, you should take good care of your laptop and handle it with care. Here are some tips to keep in mind:

  • Do not open or close the laptop lid with too much force or speed. Use both hands and open or close it gently and smoothly.
  • Do not place heavy objects on the laptop lid or press on it when it is closed. This can cause the bezel to crack or the hinge to bend.
  • Do not expose the laptop to extreme temperatures, humidity, or sunlight. This can cause the bezel to warp or fade.
  • Do not drop the laptop or hit the screen. This can cause the bezel to break or the screen to shatter.
  • Use a laptop case or a sleeve to protect the laptop from scratches, dust, and impacts when you are not using it or when you are traveling with it.
  • Clean the laptop regularly with a soft cloth or a microfiber cloth. Do not use harsh chemicals or abrasive materials that can damage the bezel or the screen.
  • Conclusion


bezel is an important part of the laptop that can get damaged due to various reasons, such as faulty hinges or physical impacts. A broken bezel can affect the appearance and functionality of the laptop, and it can also expose the internal components to dust, moisture, or shocks. Therefore, it is advisable to repair the damaged bezel as soon as possible, either by replacing it yourself or by seeking professional help. By following the steps and tips in this article, you can fix the broken bezel of your Acer Aspire Vero Nat Geo 2022 laptop and enjoy its features and performance.

Leave a Reply

Your email address will not be published. Required fields are marked *

Privacy Terms Contacts About Us