The Ultimate PC Build with Ryzen 5 5600, AORUS X470, and G.Skill RIPJAWS: What You Need to Know


CPU: Ryzen 5 5600 > – Motherboard: AORUS X470 (Gigabyte) > – RAM: G.Skill RIPJAWS 2X8 GB DDR


How to Build a PC with Ryzen 5 5600, AORUS X470, and G.Skill RIPJAWS

If you are looking for a powerful and efficient PC for gaming, streaming, or productivity, you might want to consider building your own system with AMD’s Ryzen 5 5600 processor, AORUS X470 motherboard, and G.Skill RIPJAWS RAM. In this article, we will explain why these components are a good choice, and how to assemble them into a functional PC.

The Ryzen 5 5600 is one of the latest CPUs from AMD, based on the Zen 3 architecture. It has 6 cores and 12 threads, with a base clock of 3.7 GHz and a boost clock of 4.6 GHz. It also has 32 MB of L3 cache and a TDP of 65 W. The Ryzen 5 5600 offers excellent performance for gaming and multitasking, as well as low power consumption and high efficiency. It can handle most modern games at high settings and resolutions, as well as stream them smoothly. It can also run multiple applications simultaneously without slowing down.

The AORUS X470 is a motherboard from Gigabyte, designed for AMD processors with the AM4 socket. It supports the X470 chipset, which offers features such as overclocking, PCIe 4.0, and NVMe RAID. The AORUS X470 has a 8+3 phase hybrid digital PWM design, which provides stable power delivery and cooling for the CPU. It also has dual M.2 slots with thermal guards, which allow you to install fast and reliable SSDs. The AORUS X470 also has RGB FUSION 2.0, which lets you customize the lighting effects of your system. The AORUS X470 is compatible with the Ryzen 5 5600, as long as you update the BIOS to the latest version.

The G.Skill RIPJAWS is a series of RAM modules from G.Skill, designed for high-performance and overclocking. The G.Skill RIPJAWS DDR4 RAM has a speed of 3200 MHz, which is the maximum supported by the Ryzen 5 5600. It also has a latency of CL16, which is relatively low for DDR4 memory. The G.Skill RIPJAWS DDR4 RAM has a capacity of 8 GB per module, which means you can install 16 GB of RAM in your system with two modules. This is enough for most gaming and productivity tasks, but you can also upgrade to 32 GB or more if you need more memory. The G.Skill RIPJAWS DDR4 RAM also has a sleek and durable design, with a black aluminum heat spreader and a red accent.

How to Build a PC with Ryzen 5 5600, AORUS X470, and G.Skill RIPJAWS?

To build a PC with these components, you will also need a few other parts, such as a case, a power supply, a CPU cooler, a graphics card, and storage drives. You will also need some tools, such as a screwdriver, an anti-static wrist strap, and a pair of scissors. Here are the steps to follow:

1. Unpack the case and remove the side panels. Locate the standoffs and screws that came with the case, and install them on the motherboard tray according to the ATX form factor. Make sure the standoffs match the holes on the motherboard.

2. Unpack the motherboard and place it on a flat surface. Remove the protective cover from the CPU socket, and open the lever. Unpack the CPU and align the gold triangle on the corner with the mark on the socket. Gently lower the CPU into the socket, and close the lever. Do not touch the pins on the CPU or the socket.

3. Unpack the CPU cooler and apply a small amount of thermal paste on the center of the CPU. Align the mounting brackets with the holes on the motherboard, and secure them with the screws. Connect the fan cable to the CPU fan header on the motherboard.

4. Unpack the RAM modules and locate the DIMM slots on the motherboard. Open the clips on both ends of the slots, and align the notches on the modules with the keys on the slots. Push the modules firmly into the slots until they click into place. Make sure the modules are installed in the same channel (A1 and B1, or A2 and B2) for dual-channel mode.

5. Place the motherboard inside the case, and align the I/O ports with the I/O shield on the back. Secure the motherboard with the screws that came with the case. Do not overtighten the screws.

6. Unpack the power supply and install it in the designated spot on the case. Connect the 24-pin ATX power cable and the 8-pin EPS power cable to the motherboard. Connect the SATA power cables to the storage drives, and the PCIe power cables to the graphics card (if needed).

7. Unpack the graphics card and locate the PCIe x16 slot on the motherboard. Remove the metal brackets on the back of the case that correspond to the slot. Insert the graphics card into the slot, and secure it with the screws. Connect the power cables to the graphics card (if needed).

8. Unpack the storage drives and install them in the drive bays or the M.2 slots on the motherboard. Connect the SATA data cables to the drives and the motherboard. If you are using an M.2 SSD, you may need to remove the thermal guard from the motherboard, insert the SSD into the slot, and secure it with the screw. Then, reinstall the thermal guard on top of the SSD.

9. Connect the case fans to the fan headers on the motherboard. Connect the front panel connectors (power, reset, LED, audio, USB) to the corresponding pins on the motherboard. Refer to the motherboard manual for the correct orientation and location of the connectors.

10. Reattach the side panels to the case, and plug the power cord to the power supply and the wall outlet. Connect the monitor, keyboard, mouse, and speakers to the PC. Turn on the power supply and the PC, and check if everything is working properly. If not, troubleshoot the problem by checking the connections, the BIOS settings, and the error codes.

Congratulations, you have successfully built a PC with Ryzen 5 5600, AORUS X470, and G.Skill RIPJAWS! Enjoy your new system and its performance. For more information and tips on PC building, visit [TechReviewer].

Leave a Reply

Your email address will not be published. Required fields are marked *

Privacy Terms Contacts About Us