Question:

I have a Samsung galaxy Tab A10 that ran out of battery last night while playing YouTube videos. When I plugged it in this morning, the charge screen appeared but it was flickering and did not show the battery percentage. What could be the cause of this problem and how can I fix it?

Answer:

How to fix a Samsung galaxy Tab A10 that won’t charge properly

If you have a Samsung galaxy Tab A10 that ran out of battery last night while playing YouTube videos, you might encounter a problem when you try to charge it the next day. The charge screen might appear but it might flicker and not show the battery percentage. This can be frustrating and worrying, but don’t panic. There are some possible causes and solutions for this issue.

There are several factors that could cause your tablet to behave this way when you plug it in. Some of the most common ones are:

• Faulty charger or cable: Sometimes, the charger or the cable that connects to your tablet might be damaged or defective, which could prevent your tablet from receiving enough power to charge properly. This could also cause the charge screen to flicker or not display the correct information.
• Corrupted software or firmware: If your tablet’s software or firmware is corrupted or outdated, it might interfere with the charging process and cause glitches or errors on the screen. This could happen due to a virus, a bug, or a failed update.
• Battery calibration issue: Sometimes, the battery of your tablet might lose its calibration, which means that it might not accurately reflect the actual charge level or capacity. This could cause the charge screen to show incorrect or missing information, or even prevent your tablet from turning on.

Possible solutions

Depending on the cause of your problem, there are different ways to fix your tablet and make it charge normally again. Here are some of the most effective ones:

• Check your charger and cable: The first thing you should do is to inspect your charger and cable for any signs of damage or wear. You should also try to use a different charger or cable that is compatible with your tablet and see if that makes a difference. If your tablet charges normally with a different charger or cable, then you know that the original one is faulty and you need to replace it.
• Update your software or firmware: The next thing you should do is to check if your tablet’s software or firmware is up to date and if there are any pending updates that you need to install. You can do this by going to Settings > Software update and tapping on Download and install. If there are any updates available, you should download and install them and then restart your tablet. This might fix any bugs or glitches that are affecting your tablet’s charging performance.
• Calibrate your battery: The last thing you should do is to calibrate your battery, which means to reset its memory and make it more accurate. You can do this by following these steps:
• Fully charge your tablet until it reaches 100% and then unplug it.
• Use your tablet normally until it drains completely and shuts down.
• Plug your tablet in again and let it charge uninterrupted until it reaches 100% again.
• Repeat this process at least once a month to keep your battery calibrated.

This might solve the problem of your charge screen not showing the battery percentage or flickering.

Conclusion

If

you have a Samsung galaxy Tab A10 that won’t charge properly, you don’t need to worry. There are some possible causes and solutions for this issue that you can try. You should check your charger and cable, update your software or firmware, and calibrate your battery. These steps might fix your tablet and make it charge normally again. However, if none of these steps work, you might need to contact Samsung’s customer service or take your tablet to a repair shop for further assistance.