Question:

How can I update the firmware on my Samsung 870 QVO SSD using a manual ISO file?

I have a Samsung 870 QVO SSD that requires a firmware update from SVQ01B6Q to SVQ02B6Q. However, Samsung Magician fails to install the update automatically. I have downloaded the firmware ISO file from Samsung’s website, but I am not sure how to proceed. What are the steps to update the firmware using the ISO file? Do I need to create a bootable USB or CD for this process? Please advise.

Answer:

If you have a Samsung 870 QVO SSD, you may want to update its firmware to the latest version for optimal performance and stability. However, sometimes the Samsung Magician software may not be able to install the firmware update automatically, due to various reasons such as network issues, compatibility problems, or software errors. In that case, you can still update the firmware manually by using an ISO file that contains the firmware data. Here are the steps to do so:

Step 1: Download the firmware ISO file from Samsung’s website

The first thing you need to do is to download the firmware ISO file from Samsung’s website. You can find the download link for your SSD model on this page. Make sure you select the correct firmware version for your SSD, which in your case is SVQ02B6Q. The ISO file is about 50 MB in size and should be saved on your computer.

Step 2: Create a bootable USB or CD with the firmware ISO file

The next step is to create a bootable USB or CD with the firmware ISO file. This is necessary because you cannot update the firmware from within Windows, but you need to boot from a different device that contains the firmware utility. There are various tools that can help you create a bootable USB or CD, such as Rufus, UNetbootin, or UltraISO. You can use any of them, but for this example, we will use Rufus.

• Insert a blank USB flash drive or a CD into your computer. Make sure it has at least 100 MB of free space and that you have backed up any important data on it, as it will be erased during the process.
• Download and run Rufus from its official website. You don’t need to install it, just run the executable file.
• In the Rufus interface, select your USB or CD drive under the Device section. Then, click on the SELECT button next to the Boot selection section and browse to the location where you saved the firmware ISO file. Rufus should automatically detect the ISO file and set the appropriate options for it.
• Click on the START button to begin the process of creating the bootable USB or CD. Rufus will warn you that all data on the device will be destroyed. Click OK to confirm and proceed. Wait for Rufus to finish the process, which may take a few minutes depending on the speed of your device and the ISO file size.
• Once Rufus is done, you should have a bootable USB or CD with the firmware utility on it. You can safely eject the device from your computer and proceed to the next step.

Step 3: Boot from the bootable USB or CD and update the firmware

The final step is to boot from the bootable USB or CD and update the firmware on your SSD. To do this, you need to restart your computer and enter the BIOS or UEFI settings. The exact method to do this may vary depending on your computer model and manufacturer, but usually, you need to press a certain key (such as F2, F10, F12, or Del) during the boot process to access the BIOS or UEFI menu. You can also check your computer’s manual or online documentation for more details.

• Once you are in the BIOS or UEFI menu, you need to change the boot order or priority to make your USB or CD drive the first boot device. This will allow your computer to boot from the device that contains the firmware utility instead of your hard drive. Again, the exact steps to do this may vary depending on your computer model and manufacturer, but you should look for a section called Boot or Boot Options and follow the instructions on the screen to change the boot order or priority. You can also check your computer’s manual or online documentation for more details.
• After you have changed the boot order or priority, save the changes and exit the BIOS or UEFI menu. Your computer should restart and boot from the USB or CD drive. You should see a screen that says Samsung Firmware Utility and asks you to press any key to continue. Press any key to proceed.
• The firmware utility will scan your system and detect your SSD model and firmware version. It will also show you the firmware version that is available on the USB or CD drive. If everything is correct, press Y to confirm and start the firmware update process. The firmware utility will warn you that the update process may take several minutes and that you should not turn off your computer or remove the USB or CD drive during the process. Press Y again to confirm and proceed.
• Wait for the firmware utility to finish the update process, which may take a few minutes depending on the size of the firmware file and the speed of your SSD. Do not interrupt the process or turn off your computer until it is done. You should see a message that says Firmware Update Complete and asks you to press any key to reboot. Press any key to reboot your computer.
• After your computer reboots, you can remove the USB or CD drive from your computer. You can also check the firmware version of your SSD using the Samsung Magician software or the Device Manager in Windows. It should show the new firmware version SVQ02B6Q. Congratulations, you have successfully updated the firmware on your Samsung 870 QVO SSD using a manual ISO file!

We

hope this article was helpful and informative. If you have any questions or feedback, please feel free to leave a comment below. Thank you for reading!