Making the Switch: How to Set Your ASUS Laptop’s SSD as the Primary Boot Drive


“How can I configure the BIOS of my ASUS Laptop L210 to prioritize booting from an SSD? Despite successfully installing Windows 10 on a newly added 1TB NVMe SSD and removing the HDD from the boot sequence via ‘msconfig’, the BIOS boot priority settings only display the HDD. The SSD is recognized in the storage section, but not in the boot options. What steps should I take to resolve this issue and switch the boot drive to the SSD?”


If you’re facing difficulties with setting your ASUS Laptop L210 to boot from a newly installed SSD, you’re not alone. This common issue often arises due to BIOS settings that need to be adjusted after hardware changes. Here’s a step-by-step guide to ensure your laptop boots from the SSD:


Access the BIOS Setup:

Restart your laptop and press the F2 key repeatedly as soon as the ASUS logo appears to enter the BIOS setup utility.


Check for UEFI/BIOS Updates:

Before making any changes, ensure your BIOS is up to date. An outdated BIOS may not support booting from an NVMe SSD.


Change Boot Mode:

Navigate to the ‘Boot’ tab and check if the boot mode is set to ‘UEFI’. If it’s set to ‘Legacy’, change it to ‘UEFI’, which is required for NVMe SSDs.


Secure Boot Option:

Disable ‘Secure Boot’ temporarily. This security feature can sometimes prevent the system from recognizing new hardware.


Adjust Boot Priority:

Look for a ‘Boot Priority’ or ‘Boot Order’ section. If the SSD is not listed, try to find an option to detect or rescan hardware.


Save and Exit:

After making the changes, save the settings and exit the BIOS. Your laptop should now attempt to boot from the SSD.


Re-enable Secure Boot:

Once you’ve confirmed the laptop boots from the SSD, re-enter the BIOS to re-enable ‘Secure Boot’ for added security.

If these steps don’t resolve the issue, consider the following:

  • Check SSD Compatibility:

  • Ensure the SSD is compatible with your laptop’s specifications.

  • Inspect SSD Installation:

  • Verify that the SSD is properly seated in the slot and that all connections are secure.

  • Consult the User Manual:

  • Refer to your laptop’s user manual for specific instructions on configuring the BIOS settings for new hardware.

  • Seek Professional Help:

  • If you’re still unable to resolve the issue, it may be best to consult with a professional technician.

    By following these steps, you should be able to configure your ASUS Laptop L210 to boot from the SSD, allowing you to enjoy the speed and efficiency benefits that solid-state drives offer.

    Remember, while these steps are generally applicable, the exact navigation and options may vary depending on the BIOS version and the specific model of your laptop. Always proceed with caution when making changes to the BIOS settings.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Privacy Terms Contacts About Us