Question:

What is causing my HP Victus 16-e0305ax laptop screen to go black when tilted?

I have a HP Victus 16-e0305ax laptop that is about 1.5 years old. Two months ago, I noticed that the screen would flicker or turn off when I tilted it to a different angle. The problem got worse over time, and now the screen is always black unless I apply some force to the corners of the screen. I can only use the laptop with an external monitor via HDMI.

I have consulted two technicians who said it could be a problem with the flex cable, but they could not find a replacement for my model. Another technician said it could also be a problem with the LCD or the motherboard. I am not sure who to trust or what to do. I have a limited budget and I need a working laptop for my studies. I have also heard that this model has some manufacturing defects with the screen and the hinge. Can you please advise me on what is the most likely cause of the problem and what are my options to fix it? Thank you for your help.

Answer:

This is a common problem that many HP Victus 16-e0305ax laptop users have faced. The laptop screen goes black when tilted to a certain angle, and only works when connected to an external monitor or when pressure is applied to the corners of the screen. This can be very frustrating and inconvenient, especially for students who need a reliable laptop for their studies.

The most likely cause of this problem is a faulty or damaged flex cable. The flex cable is a thin ribbon that connects the LCD screen to the motherboard. It allows the screen to display images and receive signals from the motherboard. When the laptop is tilted, the flex cable may get twisted, bent, or pinched, causing a disruption in the connection. This can result in the screen flickering, turning off, or going black.

Another possible cause of this problem is a defective LCD screen. The LCD screen is composed of liquid crystals that are illuminated by a backlight. The liquid crystals can leak, crack, or burn out, causing the screen to lose brightness, color, or contrast. This can make the screen appear black or very dim, even when the laptop is on.

A third possible cause of this problem is a malfunctioning motherboard. The motherboard is the main circuit board that controls all the components of the laptop. It sends and receives signals from the CPU, RAM, hard drive, keyboard, touchpad, speakers, and other devices. If the motherboard is damaged or corrupted, it may not be able to communicate properly with the LCD screen, causing the screen to go black or not turn on at all.

To fix this problem, you will need to identify the exact cause and replace the faulty part. You can try some troubleshooting steps to narrow down the possibilities. For example, you can:

• Check the brightness settings of your laptop and make sure they are not too low.
• Connect your laptop to an external monitor and see if the display works normally. If it does, then the problem is likely with the flex cable or the LCD screen. If it does not, then the problem is likely with the motherboard.
• Open the laptop case and inspect the flex cable for any signs of damage, such as tears, cuts, or kinks. You can also try to reseat the cable by unplugging it and plugging it back in. Be careful not to damage the cable or the connectors while doing this.
• Test the LCD screen with a multimeter or a tester tool. You can measure the voltage and resistance of the screen and compare it with the specifications of your laptop model. If the readings are abnormal, then the screen is defective and needs to be replaced.
• Test the motherboard with a diagnostic tool or a software program. You can scan the motherboard for any errors or faults and see if it is functioning properly. If the motherboard is faulty, then you will need to replace it or take it to a professional for repair.

Replacing the flex cable, the LCD screen, or the motherboard can be a costly and complicated process. You will need to find the compatible parts for your laptop model and follow the instructions carefully. You will also need to have the right tools and skills to perform the task. If you are not confident or experienced in doing this, you may want to seek help from a qualified technician or a service center. They can diagnose the problem and fix it for you, but they may charge you a fee for their service.

Alternatively, you may want to consider buying a new laptop instead of repairing your old one. Depending on the severity of the problem and the availability of the parts, repairing your laptop may not be worth the time, money, or effort. You may be able to find a better laptop with more features and performance for a reasonable price. You can also sell or recycle your old laptop and recover some of the cost.

In

conclusion, the problem of your HP Victus 16-e0305ax laptop screen going black when tilted is most likely caused by a faulty flex cable, a defective LCD screen, or a malfunctioning motherboard. You can try some troubleshooting steps to identify the cause and fix it yourself, or you can seek help from a technician or a service center. Alternatively, you can buy a new laptop and dispose of your old one. Whatever you decide to do, we hope you find a solution that works for you and your budget. Thank you for reading this article and we hope you found it helpful.