Broadcom and Windows: A Deep Dive into Driver-Based VLAN Tagging


Could you verify whether Broadcom network interface cards (NICs) natively support VLAN tagging on Windows 10 or 11 through their drivers, and if so, could you specify the model of the NIC or chipset?


VLAN tagging is a crucial feature for network segmentation and security, allowing different virtual networks to coexist on the same physical network infrastructure. When it comes to Broadcom Network Interface Cards (NICs) and their support for VLAN tagging on Windows 10 and 11, there are a few key points to consider.

Native Support for VLAN Tagging

Broadcom NICs are known for their robust performance and compatibility with various operating systems, including Windows 10 and 11. These NICs typically come with drivers that support VLAN tagging natively. This means that the VLAN tagging is handled by the NIC’s driver itself, without the need for additional software or configuration tools.

Configuring VLAN Tagging

To configure VLAN tagging on a Broadcom NIC in Windows 10 or 11, you would generally follow these steps:

1. Open Device Manager and navigate to Network adapters.

2. Right-click on the Broadcom NIC and select Properties.

3. Go to the Advanced tab and scroll down to the VLAN ID setting.

4. Enter the desired VLAN ID and click OK.

This process may vary slightly depending on the specific model of the Broadcom NIC and the version of the driver installed.

Broadcom NIC Models Supporting VLAN Tagging

While most Broadcom NICs support VLAN tagging, it’s essential to verify this feature for your specific model. Some of the Broadcom NIC models that are known to support VLAN tagging include:

  • Broadcom NetXtreme series
  • Broadcom NetLink series
  • For the most accurate information, it’s recommended to consult the official Broadcom documentation or contact their support team. They can provide detailed information on VLAN support for specific NIC models and chipsets.


In summary, Broadcom NICs do support VLAN tagging natively on Windows 10 and 11 through their drivers. This feature is accessible through the NIC properties in the Device Manager, allowing users to set up VLANs efficiently. However, for precise model and chipset details, referring to Broadcom’s official resources is the best course of action.

I hope this article provides a clear understanding of VLAN tagging capabilities on Broadcom NICs for Windows 10 and 11. If you require further details on specific models or chipsets, please refer to the official Broadcom support channels.

Leave a Reply

Your email address will not be published. Required fields are marked *

Privacy Terms Contacts About Us