Windows 10 Installation from USB: A Guide to Fixing Freezing and Restarting Problems

Question:

How can I fix the problem of windows freezing and restarting after a clean usb install? >
> I have attempted to install windows from a usb drive, but I encountered several issues during and after the installation. The system would freeze randomly and force me to reboot manually. Even after completing the installation and logging in, the system would still freeze or restart on its own, sometimes taking me to the bios or the recovery mode. I have tried various troubleshooting methods, such as running scanhealth and chkdsk commands, but none of them worked. I have also tried reinstalling windows several times, but the problem persists. I am not sure if the problem is related to my hardware, such as my ssd or gpu. I need some expert advice on how to resolve this issue.

Answer:

How to fix windows freezing and restarting after a clean usb install

If you have tried to install windows from a usb drive, you may have experienced some problems during and after the installation. Your system may freeze randomly and force you to reboot manually. Even after completing the installation and logging in, your system may still freeze or restart on its own, sometimes taking you to the bios or the recovery mode. You may have tried various troubleshooting methods, such as running scanhealth and chkdsk commands, but none of them worked. You may have also tried reinstalling windows several times, but the problem persists. You may be wondering if the problem is related to your hardware, such as your ssd or gpu. In this article, we will provide some expert advice on how to resolve this issue.

There are several possible causes of the problem of windows freezing and restarting after a clean usb install. Some of them are:

  • Corrupted or incompatible USB drive: The USB drive that you used to create the installation media may be corrupted or incompatible with your system. This may cause errors during the installation process or prevent the system from booting properly.
  • Outdated or incorrect BIOS settings: The BIOS or UEFI firmware is the software that controls the basic functions of your system, such as booting and hardware configuration. If your BIOS settings are outdated or incorrect, they may interfere with the installation or operation of windows. For example, you may need to enable UEFI mode, disable CSM or Legacy BIOS mode, disable Secure and Fast Boot, and set Windows Boot Manager as the first boot option.
  • Faulty or incompatible hardware: Some of your hardware components, such as your ssd or gpu, may be faulty or incompatible with windows. This may cause the system to freeze or crash randomly, or prevent the system from detecting the boot device.
  • Possible solutions to the problem

    Depending on the cause of the problem, you may need to try different solutions to fix it. Here are some possible solutions that you can try:

  • Create a new USB drive with the latest Windows 10 installation media: You can use the Media Creation Tool from Microsoft to create a new USB drive with the latest Windows 10 installation media. This may fix any corruption or compatibility issues with your previous USB drive. You can download the Media Creation Tool from [here]. Follow the instructions [here] to create the USB drive and install windows from it.
  • Update or reset your BIOS settings: You can update your BIOS or UEFI firmware to the latest version, or reset it to the default settings. This may fix any outdated or incorrect settings that may interfere with the installation or operation of windows. You can find the instructions on how to update or reset your BIOS settings from your system manufacturer’s website or manual. You can also refer to these articles for some general guidance: [here] and [here].
  • Check or replace your hardware components: You can check or replace your hardware components, such as your ssd or gpu, to see if they are faulty or incompatible with windows. You can use some diagnostic tools, such as the Windows Memory Diagnostic Tool or the Device Manager, to test your hardware components. You can also try to disconnect or swap your hardware components to see if the problem persists. You can find more information on how to check or replace your hardware components from your system manufacturer’s website or manual.
  • Conclusion

    We

hope that this article has helped you to fix the problem of windows freezing and restarting after a clean usb install. If none of the solutions worked for you, you may need to contact your system manufacturer or a professional technician for further assistance. You can also post your question on the Microsoft Community forum [here] to get more help from other users. Thank you for reading this article.

Leave a Reply

Your email address will not be published. Required fields are marked *

Privacy Terms Contacts About Us