Troubleshooting a Blue Screen Registry Error on an Acer Nitro 5 with an Intel NVMe M.2 SSD

Question:

How can I fix a blue screen registry error that prevents Windows installation on an Intel NVMe M.2 SSD?

I have an Acer Nitro 5 laptop with an Intel SSDPEKKW256G7 SSD that runs Windows 10. Recently, the Windows system crashed and now the laptop is stuck in a blue screen restart loop with a registry error message. I tried to use a USB drive with Windows installation media to repair or reinstall Windows, but none of the options worked. I also tried to use the command prompt to run disk repair commands, but they did not solve the problem either. I got error codes 0x80042428 and 0x80070017 when I attempted to format or delete partitions on the SSD. I also tried to access the SSD via an external USB system with Fedora 39, but I could not wipe the device signatures on the SSD. I am not sure what is causing this issue and how to fix it. I would appreciate any expert advice on this matter. Thank you.

Answer:

How to fix a blue screen registry error that prevents Windows installation on an Intel NVMe M.2 SSD

If you have an Acer Nitro 5 laptop with an Intel SSDPEKKW256G7 SSD that runs Windows 10, you may encounter a blue screen registry error that prevents you from installing or repairing Windows on your SSD. This article will explain what causes this error and how to fix it.

A blue screen registry error occurs when the Windows registry, which is a database that stores system and application settings, becomes corrupted or damaged. This can happen due to various reasons, such as malware infection, power outage, hardware failure, or improper shutdown. When the registry is corrupted, Windows cannot access or load the necessary files and settings to boot up or run properly. This results in a blue screen of death (BSOD) with a registry error message.

The registry error can also affect the SSD, which is a solid-state drive that uses flash memory to store data. The SSD can become inaccessible, unformatted, or locked by the registry error, making it impossible to install or repair Windows on it. The SSD may also show error codes such as 0x80042428 or 0x80070017 when you try to format or delete partitions on it. These error codes indicate that the SSD is either write-protected, has bad sectors, or has a corrupted file system.

How to fix the blue screen registry error?

There are several possible solutions to fix the blue screen registry error and restore the SSD to a normal state. Depending on the severity of the error and the condition of the SSD, some solutions may work better than others. Here are some of the most common and effective solutions:

  • Use a Windows installation media to repair the registry. You can use a USB drive or a DVD that contains the Windows installation media to boot up your laptop and access the Windows Recovery Environment (WinRE). From there, you can choose the Troubleshoot option and then the Advanced options. You can then select the Startup Repair option, which will scan and fix any problems with the Windows startup files and the registry. You can also select the Command Prompt option and run the following commands to repair the registry manually:
  • “` bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd chkdsk /f /r C: sfc /scannow /offbootdir=C:\ /offwindir=C:\Windows “` These commands will fix the master boot record (MBR), the boot sector, the boot configuration data (BCD), the disk errors, and the system file integrity of the Windows partition on the SSD. You may need to replace C: with the actual drive letter of your Windows partition.

  • Use a Linux system to wipe the SSD. If the Windows installation media cannot repair the registry or the SSD, you can try to use a Linux system to access and wipe the SSD. You can use a USB drive or a DVD that contains a Linux distribution, such as Fedora 39, to boot up your laptop and run the Linux system. From there, you can use the disk utility or the terminal to identify and erase the SSD. You can use the following command to wipe the device signatures on the SSD, which will remove any traces of the previous file system and partitions:
  • “` wipefs –all /dev/nvme0n1 “` This command will wipe all the signatures on the SSD, which is identified as /dev/nvme0n1 in this example. You may need to replace /dev/nvme0n1 with the actual device name of your SSD.

  • Replace the SSD with a new one. If none of the above solutions work, or if the SSD is physically damaged or has too many bad sectors, you may need to replace the SSD with a new one. You can buy a compatible SSD from a reputable vendor and install it on your laptop. You can then use the Windows installation media to install Windows 10 on the new SSD. You can also use a data recovery software or a professional service to recover any important data from the old SSD, if possible.
  • Conclusion

    A blue screen registry error can prevent you from installing or repairing Windows on your Intel NVMe M.2 SSD. This error can be caused by various factors, such as registry corruption, SSD failure, or malware infection. To fix this error, you can try to use the Windows installation media to repair the registry, use a Linux system to wipe the SSD, or replace the SSD with a new one. These solutions may help you restore the SSD to a normal state and install Windows 10 on it. However, before you attempt any of these solutions, make sure you back up your data and follow the instructions carefully. If you are not confident or experienced with these solutions, you may want to seek professional help or contact the Acer or Intel support team for assistance.

    I

hope this article helps you answer your question. If you need more help or have any feedback, please let me know. 😊

Leave a Reply

Your email address will not be published. Required fields are marked *

Privacy Terms Contacts About Us