Question:

How can I fix the malfunctioning keys on my ASUS Zenbook Q536FD laptop keyboard?

I have an ASUS Zenbook Q536FD laptop that is out of warranty. Recently, the “esc” and “a” keys have become unresponsive or slow to register. I have tried using compressed air to clean the keyboard, but it did not help. I have also opened the laptop to replace the battery and hard drive, and cleaned the fans and heat sink, but the keyboard is covered by a plastic sheath that is glued to the frame. I want to know if I can remove the keys or the sheath to inspect the keyboard for any debris or damage, and if so, how to do it without breaking anything. Alternatively, I want to know if I need to buy a new keyboard assembly and how to install it.

Answer:

If you have an ASUS Zenbook Q536FD laptop and some of the keys are not working properly, you may be wondering how to fix them. There are two possible solutions: removing the keys or the plastic sheath to clean the keyboard, or replacing the keyboard assembly with a new one. In this article, we will explain how to do both, as well as the pros and cons of each option.

Removing the keys or the plastic sheath to clean the keyboard

One possible cause of the malfunctioning keys is that there is some dust, dirt, or debris stuck under the keys or the plastic sheath that covers the keyboard. To remove them, you will need a pry tool, a Phillips head screwdriver, and a can of compressed air. Here are the steps to follow:

• Turn off your laptop and unplug it from the power source.
• Use the screwdriver to remove the screws that hold the keyboard in place. You can find a video tutorial on how to do this [here].
• Gently lift up the keyboard and disconnect the cable that connects it to the motherboard. Be careful not to damage the cable or the connector.
• Locate the key that you want to remove and use the pry tool to gently lift it up. You can find a video tutorial on how to do this [here] or [here].
• Use the compressed air to blow away any dust or debris under the key or the plastic sheath. You can also use a soft cloth or a cotton swab to wipe away any dirt or residue.
• Repeat the steps for any other keys that are not working properly.
• Reattach the key by aligning it with the switch and pressing it down until it snaps into place. You can find a video tutorial on how to do this [here] or [here].
• Reconnect the keyboard cable to the motherboard and secure the keyboard with the screws.
• Turn on your laptop and test the keys to see if they work.

The advantages of this option are that it is relatively easy, cheap, and does not require buying any new parts. The disadvantages are that it may not solve the problem if the keys are damaged or worn out, or if the issue is caused by something else. Also, removing the keys or the plastic sheath may void your warranty or damage your laptop if you are not careful.

Replacing the keyboard assembly with a new one

Another possible solution is to replace the entire keyboard assembly with a new one. This may be necessary if the keys are broken, worn out, or unresponsive, or if the issue is caused by a faulty keyboard circuit or connector. To replace the keyboard assembly, you will need a new keyboard assembly that is compatible with your laptop model, a pry tool, a Phillips head screwdriver, and a spudger. Here are the steps to follow:

• Turn off your laptop and unplug it from the power source.
• Use the screwdriver to remove the screws that hold the keyboard in place. You can find a video tutorial on how to do this [here].
• Gently lift up the keyboard and disconnect the cable that connects it to the motherboard. Be careful not to damage the cable or the connector.
• Use the pry tool and the spudger to remove the plastic sheath that covers the keyboard. You can find a video tutorial on how to do this [here].
• Remove the old keyboard assembly and replace it with the new one. Make sure the new keyboard assembly fits snugly and securely in the laptop frame.
• Reconnect the keyboard cable to the motherboard and secure the keyboard with the screws.
• Turn on your laptop and test the keys to see if they work.

The advantages of this option are that it may solve the problem more effectively and permanently, and that it may improve the performance and appearance of your keyboard. The disadvantages are that it is more expensive, difficult, and time-consuming, and that it may require ordering a new part online or from a specialized store. Also, replacing the keyboard assembly may void your warranty or damage your laptop if you are not careful.

Conclusion

In

conclusion, if you have an ASUS Zenbook Q536FD laptop and some of the keys are not working properly, you have two possible solutions: removing the keys or the plastic sheath to clean the keyboard, or replacing the keyboard assembly with a new one. Each option has its pros and cons, and you should weigh them carefully before deciding which one to choose. You should also consult the user manual or the official website of ASUS for more information and guidance. We hope this article was helpful and informative, and that you can fix your keyboard and enjoy using your laptop again.