Question:

“As an expert, could you advise on the best method to connect a PS5, which typically uses an HDMI output, to a monitor’s DisplayPort input? I own an LG 24GN65R monitor that has one HDMI port, currently used by my laptop, and one DisplayPort. There’s an overwhelming variety of adapters available, and I’m unsure which one would be the most suitable for this setup.”

Answer:

Connecting Your PS5 to a DisplayPort Monitor: A Guide to the Right Adapter

When it comes to connecting a PlayStation 5 (PS5) to a monitor with a DisplayPort input, the key is to find a reliable adapter that bridges the gap between the console’s HDMI output and the monitor’s DisplayPort input. The LG 24GN65R monitor you mentioned has one HDMI port, which is already occupied by your laptop, leaving the DisplayPort available for your PS5.

Understanding the Connection

The PS5 comes equipped with an HDMI 2.1 port, which supports higher bandwidth than HDMI 2.0, allowing for features like 4K resolution at 120Hz. However, when using an adapter to connect to a DisplayPort, you might not retain all these features, depending on the adapter’s specifications.

Choosing the Right Adapter

An active HDMI to DisplayPort adapter is required for this setup. This type of adapter converts the signal from HDMI to DisplayPort actively, rather than just changing the physical connection. It’s important to note that most adapters support HDMI 2.0 to DisplayPort 1.2, which may limit some of the PS5’s capabilities.

Recommended Adapter

The CableCreation 4K@60Hz HDMI to DisplayPort adapter with USB power is a highly recommended option. It’s designed to connect the HDMI port of your console to the DisplayPort on your monitor. To ensure compatibility with your monitor’s resolution, the DisplayPort cable used should be at least DP1.2 version.

Installation Steps

1. Connect the HDMI male end of the adapter to the PS5’s HDMI port.

2. Use a DisplayPort cable to connect the adapter to the monitor’s DisplayPort input.

3. Ensure the adapter is USB-powered to provide sufficient power for the conversion process.

Final Thoughts

While using an adapter may not allow you to utilize the full potential of the PS5’s HDMI 2.1 capabilities, it will enable you to connect to your DisplayPort monitor. The CableCreation adapter mentioned above has been tested and can provide a satisfactory experience, supporting up to 4K resolution at 60Hz, which should be more than adequate for immersive gaming sessions.

—

I hope this article helps you in setting up your PS5 with your LG monitor. Happy gaming!