A Step-by-Step VLAN Configuration Guide for D-Link Xtreme G

Question:

Could you guide me through the process of setting up a VLAN on my D-Link AirPlus Xtreme G Access Point?

Answer:

  • Connect your computer to the access point using an Ethernet cable.
  • Open a web browser and enter the default IP address for your device (often found in the manual).
  • Log in with the default credentials, unless you’ve changed them.

Step 2: Navigate to the VLAN Settings

  • Once logged in, look for the ‘Network’ settings in the menu.
  • Find the section labeled ‘VLAN’ or ‘Virtual LAN’.

Step 3: Configure VLAN Settings

  • Enable VLAN functionality if it’s not already active.
  • Create a new VLAN by specifying a VLAN ID and a name for easy identification.
  • Assign the VLAN to one or more specific ports on your access point.

Step 4: Assign IP Addresses

  • Set up a DHCP server for your VLAN or assign static IP addresses to devices connected to the VLAN.

Step 5: Configure Wireless Settings (if applicable)

  • If your VLAN is for Wi-Fi devices, configure the SSID and security settings.
  • Map the SSID to the corresponding VLAN ID.

Step 6: Save and Apply Changes

  • After configuring all settings, save your changes.
  • Reboot the access point to apply the new configuration.

Step 7: Test Your Configuration

  • Connect a device to the VLAN and check if it’s obtaining the correct IP address.
  • Ensure you can access resources and the internet as intended.
  • Remember, the exact steps may vary slightly depending on the firmware version of your D-Link AirPlus Xtreme G Access Point. Always refer to the user manual for device-specific instructions. Additionally, it’s a good practice to update your device’s firmware to the latest version before making significant changes to the configuration.

    By

following these steps, you should be able to successfully set up a VLAN on your D-Link AirPlus Xtreme G Access Point. If you encounter any issues, D-Link’s customer support can provide further assistance. Happy networking!

Leave a Reply

Your email address will not be published. Required fields are marked *

Privacy Terms Contacts About Us