Question:

What could be the cause of my phone’s extremely slow charging after its battery drained completely? I have a Mi phone with a turbo charge feature, but it only shows a 0.01% increase per second. I have tested different chargers and cables, but none of them made any difference. Could this indicate a battery damage? How can I troubleshoot or fix this problem?

Answer:

>
> If you have a Mi phone with a turbo charge feature, you might expect it to charge quickly and efficiently. However, some users have reported that their phones charge extremely slowly after their batteries drained completely. This can be frustrating and inconvenient, especially if you need to use your phone urgently. In this article, we will explore some possible causes and solutions for this problem. >
>

Possible causes

>
> There are several factors that can affect the charging speed of your phone, such as the charger, the cable, the power source, the temperature, and the battery condition. Here are some common scenarios that can cause your phone to charge slowly after its battery died: >
> – Your phone is in recovery mode. When your phone’s battery runs out completely, it may enter a recovery mode to protect itself from further damage. This mode can limit the charging current and voltage, resulting in a slower charging speed. To exit this mode, you may need to press and hold the power button for a few seconds, or wait until your phone reaches a certain battery level. > – Your phone is overheating. Charging your phone generates heat, which can affect the battery performance and lifespan. If your phone is too hot, it may reduce the charging speed to prevent overheating. To avoid this, you should keep your phone away from direct sunlight, remove any cases or covers, and avoid using your phone while charging. > – Your phone is running too many apps. If your phone is running too many apps in the background, it may consume more power than it can charge. This can slow down the charging process and drain your battery faster. To fix this, you should close any unnecessary apps, turn off features like Wi-Fi, Bluetooth, GPS, and sync, and enable airplane mode or battery saver mode. > – Your phone has a faulty or damaged battery. If none of the above scenarios apply to you, it is possible that your phone has a faulty or damaged battery. This can happen due to aging, overcharging, or physical damage. A faulty or damaged battery can affect the charging efficiency and capacity, and may even pose a safety risk. To check if your battery is faulty or damaged, you can use a battery testing app or visit a service center. >
>

Possible solutions

>
> Depending on the cause of your problem, there are different ways to troubleshoot or fix it. Here are some general tips that can help you improve your phone’s charging speed after its battery died: >
> – Use the original charger and cable. The original charger and cable that came with your phone are designed to match its specifications and optimize its charging performance. Using a different charger or cable may not deliver the right amount of current and voltage, and may damage your phone or battery. If you need to replace your charger or cable, make sure to use a compatible and certified one. > – Use a wall outlet or a fast-charging power bank. The power source that you use to charge your phone can also affect its charging speed. A wall outlet can provide more stable and consistent power than a computer USB port or a car charger. A fast-charging power bank can also boost your phone’s charging speed, as long as it supports the same fast-charging protocol as your phone. Avoid using low-quality or uncertified power sources, as they may harm your phone or battery. > – Clean the charging port and the cable connector. Dust, dirt, or debris can accumulate in the charging port and the cable connector, which can interfere with the charging connection and reduce the charging speed. To clean them, you can use a soft cloth, a cotton swab, or a toothpick, and gently remove any foreign objects. Be careful not to damage the pins or the contacts, and make sure the port and the connector are dry before charging. > – Replace the battery or the phone. If none of the above tips work, and you have confirmed that your phone has a faulty or damaged battery, you may need to replace the battery or the phone. Replacing the battery can restore your phone’s charging performance and capacity, but it may void your warranty or damage your phone if not done properly. Replacing the phone can be more expensive, but it can also give you a new and improved device. You should weigh the pros and cons of each option, and consult a professional if needed. >
>

Conclusion

>
> Charging your phone after its battery died can be a slow and frustrating process, but it does not have to be. By understanding the possible causes and solutions for this problem, you can improve your phone’s charging speed and enjoy its features. Remember to use the original or compatible charger and cable, use a reliable power source, keep your phone cool and clean, close any unnecessary apps, and replace the battery or the phone if necessary. We hope this article was helpful and informative, and we wish you a happy and fast-charging experience.